Back Draught Dampers

Back Draught Damper ADB-01

Pressure Relief Damper ADR-01

• Galvanized Steel 1.2mm high strength casing 160mm deep.

• Low weight 0.7mm galvanized steel blades for

   minimum lift off pressures.

• Low air flow resistance in fully open position

• Full length12mm stainless steel shafts minimise blade

   deflection under high differential pressures.

• Nylon bearings for long service life.

 

Back Draught Damper ADB01-SS

• Stainless Steel 1.2mm thick casing 160mm Deep

• Low weight 0.7mm stainless steel blades for minimum

   lift off pressure

• Low air flow resistance when fully open

• Full length 12mm stainless steel shafts minimise blade

   deflection at high pressures

• Nylon bearings ensure maintenance free long life

• linkage system provides uniform blade operation

 

Back Draught Damper ADB-02

Pressure Relief Damper ADR-02

• Galvanized Steel 1.2mm thick casing 160mm Deep

• High strength profiled galvanised steel blades

• Suitable for operation at 4000Pa

• Full length 12mm stainless steel shafts minimise blade

  deflection at high pressures

• Nylon bearings ensure maintenance free long life

• linkage system provides uniform blade operation

 

Circular Dampers

Rega Ventilation Limited 21/22 Eldon Way, Biggleswade, Beds SG18 8NH